Page 27 - Access Catalog 10

FLUSH PLATES
Australian Flush Plates
Datamaster’s premium Australian flush plates to accept our premium Voice-Grade, Cat5e or Cat6 IDC jacks. Also compatible with other standard Australian mechanisms and jacks including F-connectors etc. The 2-piece design has a separate back plate and cover, allowing cover to be removed for painting etc.
Fits standard Australian electrical switch plate installation hardware and screw centres, making it perfect for easy flush installation on gyprock or fibro cavity walls. Supplied unloaded without jacks, packed in individual Datamaster® zip-top bags inside carton of 10. Standard colour is white, other colours available on request subject to minimum order quantity. Dimensions 116(W) x 75(H) x 13(D)mm.
Australian Blank Flush Plate
Australian blank flush plates used for custom-mounting sockets and jacks or for covering disused mounting hardware. The 2-piece design has a separate back plate and cover, allowing cover to be removed for painting etc. Fits standard Australian electrical switch plate installation hardware and screw centers, making it perfect for easy flush installation on gyprock or fibro cavity walls. Packed in individual Datamaster® zip-top bags inside carton of 10. Standard colour is white, other colours available on request subject to minimum order quantity. Dimensions 116(W) x 75(H) x 13(D)mm.
CAT #
COLOUR
P4600WHI
White
CAT #
PORTS
COLOUR
CAT #
PORTS
COLOUR
P4601WHI 1 White P4603WHI 3 White
Surface Mounting Block 13mm
Datamaster’s 13mm deep block for surface mounting standard Australian flush plates. Suits our P4600 series flush plates and most other standard Australian switch plates. Supplied with screws for fitting flush plate. Dimensions 118(W) x 75(H) x 13(D)mm.
P4604WHI 4 White P4606WHI 6 White
Surface Mounting Block 35mm
Datamaster’s 35mm deep block for surface mounting standard Australian flush plates. Suits our P4600 series flush plates and most other standard Australian switch plates. Breakouts on all sides allow for cable or conduit entry. Supplied with screws for fitting flush plate. Dimensions 123(W) x 80(H) x 35(D)mm.
P4622WHI 35mm White
Plaster C-Bracket
Datamaster’s Galvanised metal bracket for fitting standard Australian flush plates into plaster board. Wall lugs are factory set to suit 12mm thick plaster board but can be adjusted to suit 6mm thick fibro. Dimensions and hole centres suit our P4600 series flush plates and most other standard Australian switch plates.
CAT #
P4631
P4602WHI
2
White
P4605WHI
5
White
CAT #
DEPTH
COLOUR
P4621WHI 13mm
White
CAT #
DEPTH
COLOUR
www.accesscomms.com.au | sales@accesscomms.com.au
26
FLUSH PLATES